ContinuousInk.info Forum Index
RegisterSearchFAQMemberlistUsergroups|Join Groups
Knowledge BaseLinksDownloads Gallery 2CalendarLog in
Reply to topic   printer-friendly view Page 1 of 1
Blocked head Please ,please someone Help
Author Message
Reply with quote
Post Blocked head Please ,please someone Help 
I Have very slight gaps in the magenta nozzle check which i did not have before as i done a ref print out 5 days ago.
Have tried cleaning cycle , purge print and leaving it overnight.
Only had Epson R2400 for 4-1/2 months .
Anyone here help me please.
I can E-Mail the nozzle check images so some one can give advice.
Sad

View user's profile Send private message Send e-mail
Reply with quote
Post Re: Bocked head Please ,please someone Help 
photoboy wrote:
I Have very slight gaps in the magenta nozzle check which i did not have before as i done a ref print out 5 days ago.
Have tried cleaning cycle , purge print and leaving it overnight.
Only had Epson R2400 for 4-1/2 months .
Anyone here help me please.
I can E-Mail the nozzle check images so some one can give advice.
Sad


The first thing to check is probably the ink quality so you might want to check with whoever supplied the inks.. Next up I'm trying to remember but the 2400 is a pigment ink printer so you may have the printer sitting too close to a heat source or something that's drying it out a little quicker than is ideal.

Pro-actively it's best not to site a printer next to anything like that or near air-con either for that matter (dries out air).

It's unlikely that you've borked the head completely and more probable that there's a bit of clogging going on so on that basis I'd do some searches for a guy called Art Entlich who can email you a copy of his printhead cleaning manual. My data on how to reach him is sketchy but that google link should get you started.


All in all I wouldn't panic but I would certainly try and do a little more printing to keep the printer exercised.


_________________
Printers: (Canon) MP500/830, MX700, iP4000/4200/4300/4500/5200, iX4000(A3) (Epson) C84/86, D88, CX6600, R285/800/1900 (HP) K550, K850, K5400, L7680
View user's profile Send private message Send e-mail AIM Address Yahoo Messenger MSN Messenger ICQ Number
Reply with quote
Post  
Thanks Martin,
Tried to track him down via Google but with out much luck.
I,m going to get some head cleaner and put it in a empty chipped cartridge and run the Magenta purge test print found on Ink Republic site ,
It was suggested by ink specialist to use a substance called bullet and syringe it through the the head , but i heard if you use two much force it can kill the head and at £500 for the printer i'm not going to risk it i'd rather let the cart pump the cleaner through the head at its own pressure simular two the ink pressure.
Before i do this i'm going to soak a pec pad ink isopropyl and put it under the head and leave over night . .
Thanks Photoboy.

View user's profile Send private message Send e-mail
Reply with quote
Post  
photoboy wrote:
Thanks Martin,
Tried to track him down via Google but with out much luck.
I,m going to get some head cleaner and put it in a empty chipped cartridge and run the Magenta purge test print found on Ink Republic site ,
It was suggested by ink specialist to use a substance called bullet and syringe it through the the head , but i heard if you use two much force it can kill the head and at £500 for the printer i'm not going to risk it i'd rather let the cart pump the cleaner through the head at its own pressure simular two the ink pressure.
Before i do this i'm going to soak a pec pad ink isopropyl and put it under the head and leave over night . .
Thanks Photoboy.


I'd highly recommend dropping in on nifty-stuff forums and reading up on their insights on cleaning printheads as they have a lot of good intel there too.

As a rule though you're right about "forcing" the head with cleaning fluid. Patience is definitely a much better approach!


_________________
Printers: (Canon) MP500/830, MX700, iP4000/4200/4300/4500/5200, iX4000(A3) (Epson) C84/86, D88, CX6600, R285/800/1900 (HP) K550, K850, K5400, L7680
View user's profile Send private message Send e-mail AIM Address Yahoo Messenger MSN Messenger ICQ Number
Reply with quote
Post  
Sovled it with pec pad tissue round into flatten tube shape soaked in Isopropynoland placed under head of printer over night.
Thanks photoboy.

View user's profile Send private message Send e-mail
Display posts from previous:
Reply to topic   printer-friendly view Page 1 of 1
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
  


Board Security

85044 Attacks blocked