ContinuousInk.info :: C84, C86, C88, D88 Waste ink tank modification
Author Martin Date Fri Apr 11, 2008 11:34 am Views 12521

Description Installing an external waste ink tank for the C8x series printers
Contents

1 - Intro
2 - Before you start
3 - Open up the printer
4 - Drill the side panel
5 - Add your waste tube extension
6 - Glue the mount point and Tape the tubing
7 - Thread the extension through the drilled hole
8 - Attach the tube to your waste tank
9 - Some tips:

C84, C86, C88, D88 Waste ink tank modification 

Intro

Given that the R200, 220, 300, and 320 models all have that handy little trap door to pull out the waste pump hose I decided that it was time someone tackled the C84/86 printers and put some instructions together for these models.

I've take the necessary pictures and posted them here
.. so here's a quick guide that will get written up sometime soon as a PDF..


IMPORTANT: This guide WILL invalidate your warranty with Epson and no responsibility for your decision to carry out this modification is implied or accepted by me whatsoever!. In short, if you screw up, it's your own fault... Accept your responsibilities now or just walk away!


Note: the images do link to full sized images so you can click for clearer pictures Smile
Goto page 1, 2, 3, 4, 5, 6, 7, 8, 9