ContinuousInk.info :: View topic - Canon CLI 8 and BCI 3

Canon CLI 8 and BCI 3 - how to attach elbow

through

[^/[Print]\]

ContinuousInk.info -> Build your own

#1: Canon CLI 8 and BCI 3 - how to attach elbow Author: xeroid2,

Posted: Tue May 15, 2007 7:00 pm
—
Does anyone have a close up pic of these cartridges? Where to put the elbow ? Is there a air vent that also needs to be plugged ?

#2: Re: Canon CLI 8 and BCI 3 - how to attach elbow Author: Martin, Location: South Yorkshire, UK

Posted: Tue Jun 05, 2007 12:04 pm
—

xeroid2 wrote:
Does anyone have a close up pic of these cartridges? Where to put the elbow ? Is there a air vent that also needs to be plugged ?

If you want to put the elbow in where it won't hit the case you need to pop it over the sponged area.. Bear in mind that it needs to be far enough forward to allow the cartridge to be inserted and site under the retention bar as well..

As to the vent that's the area at the back of the cartridge and does need to be sealed.. (it looks like a bunch of worm holes under the tape.

ContinuousInk.info -> Build your own

output generated using printer-friendly topic mod. All times are GMT + 1 Hour