This offer is open to anyone who is intending to purchase or who has already purchased kit for a printer that is not currently included in our list of "supported" printers.

You would need to be technically confident, competent and willing/able, so this isn't something for everyone.

The quid pro quo is:

• You take photos and/or video of the process of accessing your waste ink tubes and fitting the kit
  
• I refund a minimum of half the cost of your kit
  OR
  I provide a coupon to the equivalent value on the OctoInkjet web shop

There is no limit to the number of printers you could do this for but there are some obvious requirements:

• Photos/Video needs to illustrate installation for a "wanted" or "unknown" printer.
  
• Need to be appropriate (no porn, etc..)
  
• Copyright free (ie: given freely and without restriction or limitation)
  
• Your own work (please, no passing off other peoples work)
  
• Clear and of sufficient detail (in focus, etc..)
  
• Cover the whole process sufficiently to be of use

There may be some instances where additional images for existing printers would be appropriate or sought, in which case I'll consider a credit coupon at my discretion.


Note: Installing a kit on a printer that has limited, if any instructions involves a level of risk and requires a certain level of technical knowledge and skill. I wouldn't recommend this for anyone who like my fiancée tends to do more damage than repair when "fixing" things.


_________________
Printers: (Canon) MP500/830, MX700, iP4000/4200/4300/4500/5200, iX4000(A3) (Epson) C84/86, D88, CX6600, R285/800/1900 (HP) K550, K850, K5400, L7680