Resetting the waste ink counter on the RX620 is reported to be possible using this combination:

Quote:

Power off the printer then, hold down the STOP and the B&W Start buttons while powering on the printer

Initial ref: http://www.fixya.com/support/t162335-rx620_error_message



Last edited by Martin on Sat Sep 12, 2009 5:12 pm; edited 2 times in total
_________________
Printers: (Canon) MP500/830, MX700, iP4000/4200/4300/4500/5200, iX4000(A3) (Epson) C84/86, D88, CX6600, R285/800/1900 (HP) K550, K850, K5400, L7680

Thanks to Jean I've been able to add a guide to the RX620 which also covers the RX600 - RX630 models

http://www.octoink.co.uk/store/pages/Epson-RX620.html

As most folks who've checked the R300 modification guide will recognise this is much the same as that printer except that the trapdoor seems to be considerably bigger which has to be useful


_________________
Printers: (Canon) MP500/830, MX700, iP4000/4200/4300/4500/5200, iX4000(A3) (Epson) C84/86, D88, CX6600, R285/800/1900 (HP) K550, K850, K5400, L7680